Electrical Engineer resume example for freshers

Electrical fresher resumes work best with a clear split between power, control and design tools, plus a project or training that handled real equipment.

Make this resume in CVForgeUpload your own resume or describe yourself. Download as PDF or Word from ₹5.

Sample electrical engineer resume

A fictional fresher resume in a plain single-column layout. The names, employers and numbers are examples of the pattern. Replace them with your own, and never use a number you cannot back up.

Manish Yadav
Electrical Engineer (Fresher) | PLC, AutoCAD Electrical, Power Systems
Vadodara · +91 90000 00000 · manish.yadav@example.com

Career objective

B.E. Electrical graduate with PLC programming and AutoCAD Electrical skills and a month of training at a substation. Looking for a graduate engineer trainee role in electrical maintenance or design.

Education

  • B.E., Electrical Engineering, Sample Institute of Technology, 2026, 7.6 CGPA
  • Class XII (GSEB), 2022, 80%
  • Class X (GSEB), 2020, 86%

Internship

Industrial Trainee, Sample Power Utility · Jun 2025 – Jul 2025
  • Programmed a PLC in ladder logic to start, stop and sequence a 3-motor conveyor with emergency stop
  • Drew single-line and control wiring diagrams for the project in AutoCAD Electrical
  • Observed daily checks on a 33/11 kV substation and recorded readings in the log

Project

PLC-based automatic conveyor control · PLC ladder logic, SCADA basics
  • Helped test 10 motor starters and noted insulation resistance values
  • Simulated a basic power system load flow in MATLAB for a 5-bus network
  • Followed lockout and safety rules during the training and wrote a short safety report

Skills

PLC programming (ladder logic) · AutoCAD Electrical · MATLAB basics · Power systems basics · Motor control · MS Excel

Certifications

  • PLC and SCADA training course, 2025

Resume headline and summary example

Headline

Electrical Engineer (Fresher) | PLC, AutoCAD Electrical, Power Systems

Summary

B.E. Electrical graduate with PLC programming and AutoCAD Electrical skills and a month of training at a substation. Looking for a graduate engineer trainee role in electrical maintenance or design.

Rewrite both with your own degree, tools and role. Keep the summary to two or three lines.

Electrical Engineer bullet point examples

  • Programmed a PLC in ladder logic to start, stop and sequence a 3-motor conveyor with emergency stop
  • Drew single-line and control wiring diagrams for the project in AutoCAD Electrical
  • Observed daily checks on a 33/11 kV substation and recorded readings in the log
  • Helped test 10 motor starters and noted insulation resistance values
  • Simulated a basic power system load flow in MATLAB for a 5-bus network
  • Followed lockout and safety rules during the training and wrote a short safety report

How these bullets are built

  1. Start with a plain action verb: built, fixed, reduced, tested, prepared, handled.
  2. Say what you did and with which tool, in the words a job post would use.
  3. End with a result you can defend: a count, a time saved, an error rate, a marks or accuracy figure.
  4. Keep each bullet to one line, or two at most, and never write "I".

More on this in the guides to resume bullet points and action verbs.

Skills to show

  • PLC programming
  • AutoCAD Electrical
  • MATLAB basics
  • Power systems basics
  • Motor control
  • MS Excel

ATS keywords, if they are true for you

  • PLC
  • SCADA
  • AutoCAD Electrical
  • MATLAB
  • Power systems
  • Motor control
  • Switchgear
  • Transformers
  • Electrical maintenance
  • Safety
  • Single-line diagram
  • Testing

Use the exact words from the job post you are applying to. Add a keyword only if you can answer a question about it. The free ATS checker shows which job keywords your resume is missing.

Mistakes that get this resume skipped

  • Writing "electrical knowledge" with no equipment, voltage level or tool
  • Skipping the PLC or SCADA work that many plant roles ask for
  • No mention of safety practice in a role where it matters
— Free check —

Check your electrical engineer resume

Upload your resume. A sample electrical engineer job post is already filled in, so you see your job-match score straight away. Swap in your real job post for an exact check.

A sample Electrical Engineer job post is filled in. Paste the job you are applying for to check against it instead.

Free, no signup. Your uploaded file is deleted as soon as it has been read.

Electrical Engineer resume questions

What do electrical recruiters look for in a fresher?

Hands-on exposure: PLC programming, wiring diagrams, equipment you tested or observed, and an understanding of safety rules.

Should I list MATLAB on an electrical resume?

Yes, if you used it for a simulation or project. State what you simulated.

More resume examples · Core engineering

Also see the resume templates, resume formats by company and the ATS-friendly resume guide.

The sample resume is fictional and for illustration only. Last reviewed November 2026.